Table 3 Descriptive analysis of the linear and angular measurements
Linear and angular measurements | N | Mean | SD | Median | Minimum | Maximum |
|---|---|---|---|---|---|---|
Wits at T1 in mm | 25 | -6.7 | 2.5 | -7.1 | -10.8 | -2.1 |
Wits at T2 in mm | 25 | -5.4 | 2.6 | -5.7 | -9.3 | -0.7 |
SPP-OP at T1 in ° | 25 | 9.1 | 5.5 | 10.5 | -0.5 | 18.0 |
SPP-OP at T2 in ° | 25 | 10.3 | 5.5 | 11.0 | 0.5 | 19.0 |
ANB at T1 in ° | 25 | -1.5 | 2.2 | -1.0 | -5.5 | 2.0 |
ANB at T2 in ° | 25 | -0.5 | 2.3 | 0.0 | -4.0 | 4.5 |
Interincisal angle at T1 in ° | 25 | 130.4 | 7.8 | 131.0 | 114.5 | 148.5 |
Interincisal angle at T2 in ° | 25 | 128.2 | 5.5 | 130.0 | 113.5 | 134.5 |
Lower 1/GoMe at T1 in ° | 25 | 86.8 | 7.4 | 86.0 | 73.0 | 99.5 |
Lower 1/GoMe at T2 in ° | 25 | 88.6 | 5.2 | 88.0 | 81.0 | 99.5 |
Lower 1 Cr displacement T1 to T2 in mm | 25 | 3.7 | 1.3 | 3.6 | 1.4 | 7.1 |